Our company produce vertical turbine pump,vertical long axis pump, vertical type condensate pump ,vertical wet pit pump,right Angle gear box.

Manufacturer of vertical turbine pump

Focus on vertical wet pit pump, right Angle gear box

008618507312158

008613974960765

QQ: 545492904 506677082

Wet pit single-shell vertical diversion turbine pump

Date:2024/9/9 18:10:42

Views:


Source:[news:source]

Wet pit single-shell vertical diversion pump

The wet pit single-case vertical diversion pump is a multi-stage radially split vertical centrifugal pump, which fully implements the API 610 11th edition "Centrifugal Pumps for Petroleum, Heavy Chemical and Natural Gas Industries" standard. The VMC pump first impeller is at the lowest end of the pump. And it is a suction impeller, which can meet the demanding requirements of the device for cavitation performance. The pump is equipped with a balance drum device to balance the axial force, and the residual axial force is balanced by a pair of diagonal contact ball bearings. The angular contact ball bearings in the bearing housing are lubricated by lubricating oil and have an independent internal circulation automatic lubrication system to improve the service life of the bearings.

Wet pit single-shell vertical diversion turbine pump

Performance range


Specification DN: 40~200mm


Flow Q: ~800m3/h


Head H: ~800m


Working pressure P: ~10MPa


Operating temperature: -20°C~120°C


Rotational speed n: 1470 or 2950r/min


Structural features


1. Pump body and support pipe


◆ VMC is a multi-stage submerged pump structure, the pump body is installed in the medium pool liquid, and the installation depth of the pump body is determined by the cavitation allowance of the device and the cavitation allowance of the pump, which can ensure that the pump does not cavitate in a harsh environment.


◆ The structure of the support pipe adapts to the requirements of the medium conveyed by the pump. Between the two support pipes, an intermediate guide bearing is installed, and the span between the guide bearings meets the requirements of the API610 standard to ensure that the allowable continuous speed is lower than the first critical speed, and the rigid shaft is designed to ensure the smooth operation of the pump and the vibration is small to the greatest extent.


2. Impeller and guide vane


◆ The first stage impeller is generally a suction impeller, which can improve the cavitation performance of the pump.


◆ Each specification has several sets of impellers and guide vanes, which are suitable for different operating requirements, with stable performance, high efficiency and low NPSHr value.


3. Bearing body and lubrication


◆ Paired angular contact ball bearings are used to bear the residual axial force and rotor weight.


◆ The large oil storage chamber of the bearing box is equipped with an independent internal circulation automatic lubrication system, which can not only effectively lubricate the bearing, but also make the bearing oil temperature uniform, and ensure the long-life operation of the bearing.


◆ When the temperature of the conveying medium is high, the cooling device can be used to reduce the temperature of the oil chamber.


◆ Large capacity design of oil chamber and large oil storage capacity.


◆ The constant oil cup compensates the lubricating oil online, and the oil level gauge detects the oil level in real time.


◆ The bearing parts can be disassembled and assembled as a whole, which is easy to maintain.


4. Balancing device


◆ Balance drum device is used to balance the axial force


◆ Through the connection between the pipe and the rear end of the balance drum, the pressure of the mechanical seal cavity can be reduced.


Previous:Vertical Wet Pit Turbine pumps

Next:没有了!

Back to list

Parners

LINKS

073184800558

073184810558

008618507312158

008613974960765

Wechat QR code